Description

15Gn series steel belt shot blasting machine is suitable for sand removal, rust removal, oxidation skin removal and surface strengthening of small castings, forgings, stamping parts, gears, springs and other parts, especially for cleaning and strengthening of parts that are not afraid of collision.The shot blasting machine uses the cavity formed by the manganese steel crawler as the workpiece carrier. When working, the track rotates, which drives the workpiece in the cavity to roll, so the inner and outer surfaces of the parts can be cleaned well. 

Technical data

Working principle

After adding a specified number of workpieces in the shot blasting chamber, the pneumatic door is automatically closed, the machine is started, the workpiece is driven by the drum, and it starts to flip. At the same time, the abrasives thrown out by the blast wheel form a fan-shaped beam, which evenly strikes the workpiece surface.The thrown abrasives and grit flow from the small holes on the steel belt into the screw conveyor at the bottom, and are conveyed into the elevator, which is transported by the elevator to the separator for separation. Dust-containing gas is sucked into the dust collector by the fan for filtering, and then becomes clean air, which is discharged into the atmosphere. The dust is blown back into the dust collection box at the bottom of the dust collector by air, and the user can remove it regularly. Waste sand flows out of the waste pipe and can be reused.The shot and sand mixture is recovered into the chamber through a recovery tube, and reused after the separator is separated; the clean abrasive enters the blast wheel through the abrasive gate and throws the workpiece.

Advantage

 Compact design, simple operation principle

 Force but gently turn and roll parts

 Continuous and thorough shot removal